need some help with hypermesh

denin dominic · March 2020

im conducting 3 simulations of 3 models on hyper mesh. i have applied the loads and the constraints but Im not sure why when i click optistrut, nothing bis opening and there is no error warnings or anything please help if you can

Koushik Chandrashekhar_21806 · March 2020

Hi,

Before opening HyperMesh software, delete the settings files as explained in the following post:

https://community.altair.com/community?id=community_question&sys_id=044688761b2bd0908017dc61ec4bcb69

And, change the working directory for the .fem file and then run.

If you still face the same issue, share your .hm file if possible.

Rahul_P1 · April 2020

are there special characters in the name in the save field - https://community.altair.com/community?id=community_question&sys_id=b876443a1b2bd0908017dc61ec4bcb0f
Or while running the file the .fem extension was not added in the save field perhaps?
Or the full version HyperMesh was installed and activated with the student edition license so solvers wont be in there
Or the files are in a read only folder, - https://community.altair.com/community?id=community_question&sys_id=ab76483a1b2bd0908017dc61ec4bcb51

need some help with hypermesh

Answers

Welcome!

Welcome!

Quick Links

Categories