Create abaqus *FILM cards with linear distribution of temperatures and heat transfer coefficient. no need of defining a "complex" equation. *Film on solid faces, shells and on shell edges are supported.

3 nodes (n1/n2/n3) defining a system. First two nodes define the local x axis. Temperature and HTC is linear along local x and constant along local y and z. Elements to apply loads on. 0,2 or 3 nodes(abc) to define ?edge(2) or solid faces(3). If no nodes are given, loads are applied to shells.

Functionality

Model/Analysis

Subfunctionality

Model Setup

Interface

Abaqus